CTX140315
Provisioning Server
Provisioning Services 7_1,Provisioning Services 7_0,Provisioning Services 6_1,Provisioning Services 6_0
Configuration,Performance
2015-09-09
2005-06-06
This article provides a workaround when TSBCPL cannot be launched and configured on Provisioning Service Server.

Symptoms or Error

The administrator is unable to launch C:\Program Files\Citrix\Provisioning Services\tsbcpl.cpl to bind the Citrix Two-Stage Boot service to a specific network adapter on the Provisioning Server.


Solution

Workaround

Caution! Refer to the Disclaimer at the end of this article before using Registry Editor.

As a workaround for this issue, replace the GUID in the string value Adapters under HKLM\System\CurrentControlSet\Services\PVSTSB\Parameters with the GUID of the network adapter you want to bind Citrix Two-Stage Boot service to.

To find a list of network adapter GUIDs type netsh lan show interfaces in the command prompt.


Problem Cause

Citrix is aware of this issue. A current manual workaround is in place.


Additional Resources

To find out more about Boot Device Manager, see Using the Manage Boot Devices Utility.


Disclaimer

Caution! Using Registry Editor incorrectly can cause serious problems that might require you to reinstall your operating system. Citrix cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk. Be sure to back up the registry before you edit it.

Applicable Products


 

Join the conversation

Citrix Discussions

Open a case

Citrix Support

特别说明


本文来源为Citrix.com所有,翻译后版权归翻译者所有.如需转载请注明出处.

文档版本


.

广告招租


最新留言


.

广告招租


.